OEM Hardness 57.6 High Cr Energy Saving Ball Mill Lining
1. High Chrome white iron we can produce includes 15%Cr,18%Cr and 20%Cr and 26%Cr;
2. Excellent wear performance: under same working condition, the wear property of High Chrome mill liners is four times
of thatof high manganese steel liners and twice of that of low Chrome alloy steel liners;
3. Hardness: more than HRC55;
4. Microstructure: Fine martensite + Carbide + Austenite(less than 6%);
5. International Standard to be applied: AS2027,ASTM A532 and BS4844.
The Combined Self-fastened Boltless Ball Mill Liners
This product,invented by Mr. Chen Changshun,senior engineer and the director of the company,is known
as “China Best Liner”.It includes two parts, high wear resistance boltless plates,and highly expandable
riveting plates,which are self-fastened and strengthened to withstand impact from mill balls.
We possess famous patented product------
Combined Self-fastened (Boltless) Ball Mill Liners, or called CHINA BEST LINER.
In 2012,we registered a new patent about Liner Technology.
In December of 2000,we successfully registered the international patent in Canada.
In 1988 and 1997,we claimed domestic patents for ball mill liners .
The outstanding advantage of our liners is boltless.
The general advantages in ball mills are as follows:
|
Output Increased
|
5~20%
|
|
Power Consumption Reduced
|
5~20%
|
|
Maintenance Decreased
|
Above 98%
|
|
The liners are easily installed and existing mills need no modification.
|
The additional advantages in cement mills are as follows:
|
No leakage of slurry
|
|
No repairs during service periods
|
|
Better reliability and stability
|
|
Production Improvement
|
|
Noise reduction
|
In the recent 20 years,our liners have been widely used in large,medium and small ball mills in Chinese
power generation,mining,cement,chemical engineering and metallurgical industries and super fine
pulverizing equipments.
It is the only recommended liner product in the latest standard of the electric-power industry in China.
Materials 1: Double-Media Quenching Chromium-Molybdenum Alloy Steel Series
We specially design the material for ball mill liners in mines, coal-fired power plants and cement plants, etc.
With our special double-media quenching process, the material can not only achieve ideal hardness
(HRC48~55) but also ideal toughness value (AK30~100J).It can completely meet the requirement of liners
of large and middle-size ball mills at home and abroad.The match of Middle Chrome Liners and High
Chrome Cast Balls has been the typical model in coal mills and cement mills. Meanwhile,the material is
applicable to the teeth plates,armored plates and hammers of crushers and excavator bucket teeth.
Materials 2: Pearlitic Chromium-Molybdenum Alloy Steel Series
The Pearlitic Chromium-Molybdenum Alloy Steel Liners are widely used in AG Mill,SAG Mill and Ball Mills.
Hardness: HB310-375 (equivalent to HRC33-42)
Impact resistant Value: Ak≥60J (60×10×10mm) in normal ambient temperature.
We can produce pearlitic Cr-Mo steel as per AS2074 Gr. L / 2B.
Materials 3 : High Chrome White Iron Series
High Chrome white iron we can produce include 15%Cr,18%Cr,20%Cr and 26%Cr.Under same working
condition,the wear performance of High Chrome mill liners is four times of that of high manganese steel
liners and twice of that of low Chrome alloy steel liners.Meanwhile,we can produce high Chrome castings
as per AS2027,ASTM A532 and BS4844.
Customer-made Mill Liners
In addition to our patented Boltless Mill Liners,we can produce liners as per the request of customers.
So far,we have been the regular suppliers of mill liners for Magotteaux and Foster Wheeler Power Group.
Now,we have supplied steel caps inserted in rubber lifters for SAG mills and AG mills to some mines in
Australia and New Zealand.
Wear Parts for Crusher
Jaw plates and cheek plates for jaw crushers,blow bars and impact plates for impact crushers,cone liners
for gyratory crushers,hammers for hammer crushers and concaves and mantles for cone crushers.
Depending on the specific working conditions,all wear parts can be ordered as Manganese Steel,high Cr
cast iron or Cr-Mo Alloy Steel.
Technical Parameters
Our foundry has complete melting,heat treatment and test equipments,such as mid-frequency induction
electrical furnaces,quenching and tempering furnaces,blast shot,spectrometer,Rockwell and Brinell
Hardness tester,impactor, UT tester and metallographic microscope.We achieved the certificate of quality
management system ISO 9001:2000.We have been exporting castings to oversea markets,such as Brazil,Australia and South Africa.
| Item |
Cr-Mo |
Cr-Mo |
Cr-Mo |
High Cr white iron |
High Cr Alloy Steel |
High Manganese Steel |
Ni-Hard cast iron |
| Alloy Steel I |
Alloy Steel II |
Alloy Steel III |
| C |
0.30~0.50 |
0.65~0.90 |
0.40~0.90 |
2.40~3.20 |
1.1~2.2 |
0.90~1.30 |
2.40~3.60 |
| Si |
0.50~1.20 |
≤0.75 |
0.70~1.20 |
0.60~1.20 |
0.60~1.20 |
≤0.08 |
≤0.80 |
| Mn |
0.40~1.20 |
0.50~1.20 |
0.60~1.00 |
0.50~1.00 |
0.50~1.00 |
11.00~18.00 |
≤2.0 |
| Cr |
1.70~2.50 |
1.50~2.50 |
4.00~7.00 |
12.00~30.00 |
11.00~30.00 |
1.50~2.50 |
1.5~10 |
| S |
≤0.04 |
≤0.06 |
≤0.04 |
≤0.04 |
≤0.04 |
≤0.04 |
≤0.15 |
| P |
≤0.04 |
≤0.06 |
≤0.06 |
≤0.06 |
≤0.06 |
≤0.06 |
≤0.15 |
| Mo |
≤0.5 |
≤0.5 |
≤0.5 |
0.10~3.0 |
0.10~3.0 |
≤1.0 |
≤0.10 |
| Cu |
0.10~0.60 |
≤0.25 |
0.20~0.40 |
0.10~1.00 |
0.10~1.00 |
- |
- |
| Ni |
≤0.50 |
≤0.30 |
0~0.30 |
0~0.30 |
0~0.30 |
- |
3.3~10 |
| Re |
≤0.02 |
≤0.02 |
≤0.02 |
- |
- |
- |
- |
| Equivalent |
DL/T 681-1999 |
AS 2074 L2B Mod |
DL/T 681-1999 |
GB/T 8263-1999 |
GB/T 5680-1998 |
GB/T 8263-1999 |
| Specifications |
|
AS 2027 Cr27 |
DL/T 681-1999 |
AS 2027/Ni-Cr1-550 |
| |
GB/T26651-2011 |
AS 2027 CrMo 15/3 |
JIS G 5153-1999 |
AS 2027/Ni-Cr2-500 |
| |
|
AS 2027 CrMo 20/2/1 |
ASTM A 128 |
AS 2027/Ni-Cr4-500 |
| |
|
ASTM A532 Class III type A 25% Cr |
DIN GX120Mn12 |
AS 2027/Ni-Cr4-600 |
| |
|
ASTM A532Class II type B 15% Cr-Mo |
AFNOR:Z120Mn12 |
AS 2027/Ni-Cr4-630 |
| |
|
BS 4844 3E |
|
ASTM A 532 1-A,B,C,D |
| |
|
DIN1695 |
|
ASTM A 532 2-A,B,C,D,E |
| |
|
NFA32401. |
|
ASTM A 532 3-A |
| Material Type |
Martensite Steel |
Martensite or |
Martensite Steel |
Martensite matrix |
Austenitic Mn Steel |
- |
| Pearlitic Cr Mo Steel |
| Hardness |
HRc≥48 |
HB470 & |
HRc≥50 |
HRc≥56 |
HB≤300 |
HRc≥56 |
| HB 321~370 |
| Impact Value |
Ak≥40J |
- |
Ak≥10J |
Ak≥4J |
Ak≥80J |
- |
Product Tags:
|
|
OEM Hardness 57.6 High Cr Energy Saving Ball Mill Lining AS2027 / ASTM A532 / BS4844 Images
|
